All IPs > Analog & Mixed Signal > Graphics & Video Modules
The realm of graphics and video modules within the analog and mixed signal category encapsulates a wide array of semiconductor IPs that are integral to modern multimedia technologies. These IPs are designed to enhance the performance of graphics rendering and video processing, catering to the increasing demand for high-quality visual content in various electronic devices. From mobile phones and tablets to gaming consoles and smart TVs, graphics and video modules serve as the backbone for delivering immersive and realistic experiences.
Semiconductor IP solutions in this category are crucial for managing the complex tasks associated with graphics processing units (GPUs) and video modules. They facilitate the seamless integration of high-definition video playback, 3D rendering, and image processing capabilities. Such IPs are engineered to optimize power consumption while maintaining superior performance, a critical requirement for mobile devices and other power-sensitive applications. The inclusion of analog and mixed signal technologies ensures that these modules can effectively handle analog inputs and outputs alongside digital signals, thereby providing a versatile interface for various consumer electronics.
In the graphics and video modules category, you'll find a diverse range of products such as digital-to-analog converters (DACs), analog-to-digital converters (ADCs), video encoders and decoders, and integrated circuits that support functions like video compression and decompression. These components are essential for transforming raw data into viewable content, applying corrective adjustments and enhancing picture quality. Furthermore, they support sophisticated features such as motion detection, noise reduction, and color correction, which are vital for achieving the highest visual fidelity.
As consumer expectations for video quality continue to rise, especially with the advent of 4K and 8K content, the importance of robust graphics and video modules within the semiconductor IP landscape has never been greater. These IPs not only empower manufacturers to meet industry standards for visual performance but also contribute to the innovation of new technologies and applications, such as virtual reality (VR) and augmented reality (AR), where the demand for real-time, high-resolution graphics is paramount. The integration of analog and mixed signal capabilities within these modules underscores their significance in the next generation of multimedia devices, solidifying their role as a staple in the development of future electronics.
Great River Technology offers the ARINC 818 Product Suite, a comprehensive collection of tools and products designed to cover the full spectrum of ARINC 818 applications. This suite is pivotal for engineers and designers who are focused on the aviation sector, providing solutions necessary for the creation, testing, and deployment of high-speed digital interfaces in avionics. The suite supports design and implementation phases by offering robust support tools tailored for ARINC 818 development, including detailed implementers' guides and simulation resources. What's unique about this suite is its ability to facilitate process integrations for ARINC 818 standards across various platforms, making it adaptable for differing needs in aviation systems. The integration tools provided ensure that systems can efficiently manage data and video transmissions, providing clarity, speed, and reliability, all essential factors in mission-critical environments. Great River Technology’s ARINC 818 Product Suite is engineered to ensure seamless interoperability, offering support from initial project development through to practical operation, thus enabling avionic systems to function optimally in both standard and specialized conditions.
Altek's 3D Imaging Chip is a breakthrough in the field of vision technology. Designed with an emphasis on depth perception, it enhances the accuracy of 3D scene capturing, making it ideal for applications requiring precise distance gauging such as autonomous vehicles and drones. The chip integrates seamlessly within complex systems, boasting superior recognition accuracy that ensures reliable and robust performance. Building upon years of expertise in 3D imaging, this chip supports multiple 3D modes, offering flexible solutions for devices from surveillance robots to delivery mechanisms. It facilitates medium-to-long-range detection needs thanks to its refined depth sensing capabilities. Altek's approach ensures a comprehensive package from modular design to chip production, creating a cohesive system that marries both hardware and software effectively. Deployed within various market segments, it delivers adaptable image solutions with dynamic design agility. Its imaging prowess is further enhanced by state-of-the-art algorithms that refine image quality and facilitate facial detection and recognition, thereby expanding its utility across diverse domains.
The RayCore MC is a revolutionary real-time path and ray-tracing GPU designed to enhance rendering with minimal power consumption. This GPU IP is tailored for real-time applications, offering a rich graphical experience without compromising on speed or efficiency. By utilizing advanced ray-tracing capabilities, RayCore MC provides stunning visual effects and lifelike animations, setting a high standard for quality in digital graphics. Engineered for scalability and performance, RayCore MC stands out in the crowded field of GPU technologies by delivering seamless, low-latency graphics. It is particularly suited for applications in gaming, virtual reality, and the burgeoning metaverse, where realistic rendering is paramount. The architecture supports efficient data management, ensuring that even the most complex visual tasks are handled with ease. RayCore MC's architecture supports a wide array of applications beyond entertainment, making it a vital tool in areas such as autonomous vehicles and data-driven industries. Its blend of power efficiency and graphical prowess ensures that developers can rely on RayCore MC for cutting-edge, resource-light graphic solutions.
The ISPido on VIP Board is tailored specifically for Lattice Semiconductor's Video Interface Platform (VIP) and is designed to achieve clear and balanced real-time imaging. This ISPido variant supports automatic configuration options to provide optimal settings the moment the board is powered on. Alternatively, users can customize their settings through a menu interface, allowing for adjustments such as gamma table selection and convolutional filtering. Equipped with the CrossLink VIP Input Bridge, the board features dual Sony IMX 214 image sensors and an ECP5 VIP Processor. The ECP5-85 FPGA ensures reliable processing power while potential outputs include HDMI in YCrCb 4:2:2 format. This flexibility ensures users have a complete, integrated solution that supports runtime calibration and serial port menu configuration, making it an extremely practical choice for real-time applications. The ISPido on VIP Board is built to facilitate seamless integration and high interoperability, making it a suitable choice for those engaged in designing complex imaging solutions. Its adaptability and high-definition support make it particularly advantageous for users seeking to implement sophisticated vision technologies in a variety of industrial applications.
ELFIS2 is a sophisticated visible light imaging ASIC designed to deliver superior performance under the extreme conditions typical in space. Known for its radiation hard design, it withstands both total ionizing dose (TID) and single event effects (SEU/SEL), ensuring dependable operation even when exposed to high radiation levels in outer space. This image sensor features HDR (High Dynamic Range) capabilities, which allow it to capture clear, contrast-rich images in environments with varying light intensities, without motion artifacts thanks to its Motion Artifact Free (MAF) technology. Additionally, its global shutter ensures that every pixel is exposed simultaneously, preventing distortion in high-speed imaging applications. Utilizing back-side illumination (BSI), the ELFIS2 achieves superior sensitivity and quantum efficiency, making it an ideal choice for challenging lighting conditions. This combination of advanced features makes the ELFIS2 particularly well-suited for scientific and space-based imaging applications requiring exacting standards.
Laser triangulation sensors by Riftek are engineered for precise, non-contact measurement tasks. Covering a range of applications from position detection to dimensional checks, these sensors operate over distances from 2 mm up to 2.5 meters. They boast a remarkable accuracy of ±1 µm and a high sampling frequency of 160 kHz. These sensors utilize advanced blue and infrared laser technologies to deliver unparalleled performance in various industrial environments, making them ideal for monitoring and control solutions.
The TW330 distortion correction IP is tailored for use in applications requiring dynamic image transformations, such as VR headsets and automotive HUDs. Utilizing GPU-powered technologies, it offers real-time coordinate transformations, distortion corrections, and other modifications up to a resolution of 16K x 16K in both RGB and YUV formats. This IP is crucial for enhancing visual accuracy and display adaptability across varied markets.
ISPido is a powerful and flexible image signal processing pipeline tailored for high-resolution image processing and tuning. It supports a comprehensive pipeline of image enhancement features such as defect correction, color filter array interpolation, and various color space conversions, all configurable via the AXI4-LITE protocol. Designed to handle input depths of 8, 10, or 12 bits, ISPido excels in processing high-definition resolutions up to 7680x7680 pixels, making it highly suitable for a variety of advanced vision applications. The architecture of ISPido is built to be highly compatible with AMBA AXI4 standards, ensuring that it can be seamlessly integrated into existing systems. Each module in the pipeline is individually configurable, allowing for extensive customization to optimize performance. Features such as auto-white balance, gamma correction, and HDR chroma resampling empower developers to produce precise and visually accurate outputs in complex environments. ISPido's modular and versatile design makes it an ideal choice for deploying in heterogeneous processing environments, ranging from low-power battery-operated devices to sophisticated vision systems capable of handling resolutions higher than 8K. This adaptability makes it a prime solution for developers working across various sectors demanding high-quality image processing.
The Hyperspectral Imaging System developed by Imec is designed to capture images across numerous wavelengths, enabling detailed analysis of spectral information beyond conventional imaging. This hyperspectral imaging technology is pivotal in extracting valuable insights in fields such as precision agriculture, environmental monitoring, and industrial inspection. With its versatile applications, it offers enhanced capabilities in material identification, chemical analysis, and quality control processes. This system incorporates state-of-the-art sensors that capture data with high spectral and spatial resolution, providing a comprehensive spectral fingerprint of the imaged scene. It excels in distinguishing subtle differences in material properties by analyzing the light reflected from different surfaces across various spectral bands. By using this advanced imaging system, users can perform complex analyses such as vegetation monitoring, pollution detection, and mineral mapping with unprecedented precision. It allows for non-destructive testing, which is crucial for industries like food safety, pharmaceutical production, and environmental science.
The 4K Video Scaler from Zipcores is a high-quality RGB video scaler that is meticulously optimized for Ultra-High-Definition (UHD) 4K digital scaling applications. It is engineered to handle 2 pixels per clock cycle with an impressive effective pixel clock rate reaching up to 600 MHz. This capability makes it particularly suitable for mid-range FPGA and SoC devices. Its design is centered around simplicity, incorporating input/output interfaces that are fully compatible with AXI4-stream, eliminating the need for any frame buffer or external memory. This scaler stands out for delivering unparalleled video scaling efficiency, catering to the evolving demands of high-resolution graphics and video processing applications.
The CTAccel Image Processor on Intel Agilex FPGA is designed to handle high-performance image processing by capitalizing on the robust capabilities of Intel's Agilex FPGAs. These FPGAs, leveraging the 10 nm SuperFin process technology, are ideal for applications demanding high performance, power efficiency, and compact sizes. Featuring advanced DSP blocks and high-speed transceivers, this IP thrives in accelerating image processing tasks that are typically computational-intensive when executed on CPUs. One of the main advantages is its ability to significantly enhance image processing throughput, achieving up to 20 times the speed while maintaining reduced latency. This performance prowess is coupled with low power consumption, leading to decreased operational and maintenance costs due to fewer required server instances. Additionally, the solution is fully compatible with mainstream image processing software, facilitating seamless integration and leveraging existing software investments. The adaptability of the FPGA allows for remote reconfiguration, ensuring that the IP can be tailored to specific image processing scenarios without necessitating a server reboot. This ease of maintenance, combined with a substantial boost in compute density, underscores the IP's suitability for high-demand image processing environments, such as those encountered in data centers and cloud computing platforms.
In smartphone applications, ActLight’s Dynamic PhotoDetector (DPD) offers a step-change in photodetection technology, enhancing features such as proximity sensing and ambient light detection. This high sensitivity sensor, with its ability to detect subtle changes in light, supports functions like automatic screen brightness adjustments and energy-efficient proximity sensing. Designed for low voltage operation, the DPD effectively reduces power consumption, making it suitable for high-performance phones without increasing thermal load. The technology also facilitates innovative applications like 3D imaging and eye-tracking, adding richness to user experiences in gaming and augmented reality.
Akronic's mmW-IC Wireless Transceivers represent a pinnacle of design in millimeter-wave frequency domains, offering unparalleled expertise in the development of integrated solutions for both telecom and radar applications. Operating in frequency ranges between 6 GHz and 120 GHz, these transceivers support high-speed communication links and advanced radar sensing applications. The company’s deep-rooted experience includes crafting complete transceiver solutions for next-generation telecom standards, supporting wireless connections across various bands such as unlicensed 60GHz and E-band frequencies. Akronic’s transceivers are known for their robust architectures, incorporating proprietary passives and optimized design topologies. These transceivers offer capabilities for backhaul, fronthaul, and point-to-point applications, featuring strong emphases on reducing cost and risk while accelerating time-to-market. In radar technology, Akronic’s offering includes FMCW radar transceivers for automotive applications and beyond, with specific support for frequencies such as 60GHz, 77GHz, and 94GHz. Their design methodology ensures high first-silicon success rates due to precision in chip-to-PCB landing design and electromagnetic simulations, effectively turning high-frequency requirements into viable silicon solutions.
Designed for smaller scale transformations, the TW220/240 IP handles tasks such as distortion correction, scaling, and rotation for images up to 4K x 4K resolution. It supports RGB and YUV formats, offering vital capabilities for applications needing precision in image processing at lower resolutions. Its applications span from consumer digital products to professional imaging equipment.
The CTAccel Image Processor for Intel PAC is crafted to elevate the processing capabilities of data centers by transferring intensive image processing tasks from CPU to FPGA. By exploiting the strengths of Intel's Programmable Acceleration Card (PAC), this IP offers substantial improvements in throughput, latency, and Total Cost of Ownership (TCO). This IP enhances data center efficiency with increased image processing speeds ranging from four to fivefold over traditional CPU solutions, alongside reduced latency by two to threefold. The result is fewer servers needed, translating into lower maintenance and energy costs. Its compatibility with well-known image processing tools ensures that users need not alter their existing setups substantially to benefit from the acceleration offered by the FPGA. Moreover, the CTAccel Image Processor leverages advanced FPGA partial reconfiguration, allowing users to update and adjust computational cores remotely, maximizing performance for specific applications without downtime. This flexibility is pivotal for scenarios involving varied processing loads or evolving computational demands, ensuring uninterrupted performance enhancement.
CTAccel's Image Processor for AWS offers a powerful image processing acceleration solution as part of Amazon's cloud infrastructure. This FPGA-based processor is available as an Amazon Machine Image (AMI) and enables customers to significantly enhance their image processing capabilities within the cloud environment. The AWS-based accelerator provides a remarkable tenfold increase in image processing throughput and similar reductions in computational latency, positively impacting Total Cost of Ownership (TCO) by reducing infrastructure needs and improving operational efficiency. These enhancements are crucial for applications requiring intensive image analysis and processing. Moreover, the processor supports a variety of image enhancement functions such as JPEG thumbnail generation and color adjustments, making it suitable for diverse cloud-based processing scenarios. Its integration within the AWS ecosystem ensures that users can easily deploy and manage these advanced processing capabilities across various imaging workflows with minimal disruption.
Designed for intricate surface and profile measurements, Riftek's 2D Laser Scanners offer exceptional performance in 2D and 3D configurations. These scanners are ideally suited for use in welding robots, providing a precise measurement range from 10 mm to 1010 mm. They achieve a remarkable sampling rate of up to 16,000 profiles per second, with a linearity of 0.01% full scale. Employing both blue and infrared lasers, these devices provide robust and consistent data for profiling and surface analysis tasks in demanding industrial settings.
Engineered for medical imaging, the MVUM1000 ultrasound sensor array incorporates 256 elements, utilizing CMUT technology to ensure high integration with electronic interfaces. This design supports low power usage with high sensitivity, accommodating multiple imaging modes. Its compact form factor and advanced functionality make it ideal for point-of-care and portable ultrasound applications.
The CTAccel Image Processor for Xilinx's Alveo U200 is a FPGA-based accelerator aimed at enhancing image processing workloads in server environments. Utilizing the powerful capabilities of the Alveo U200 FPGA, this processor dramatically boosts throughput and reduces processing latency for data centers. The accelerator can vastly increase image processing speed, up to 4 to 6 times that of traditional CPUs, and decrease latency likewise, ensuring that compute density in a server setting is significantly boosted. This performance uplift enables data centers to lower maintenance and operational costs due to reduced hardware requirements. Furthermore, this IP maintains full compatibility with popular image processing software like OpenCV and ImageMagick, ensuring smooth adaptation for existing workflows. The advanced FPGA partial reconfiguration technology allows for dynamic updates and adjustments, increasing the IP's pragmatism for a wide array of image-related applications and improving overall performance without the need for server reboots.
Korusys' Video Wall Display Management System is a sophisticated solution for managing multiple video outputs from a single source. Designed to support digital signage and public information displays, it processes HDMI or Display Port video inputs and synchronizes their display across up to four monitors. The system is customizable and scalable, allowing for various configurations like cloning or spanning inputs across multiple outputs. This flexibility, combined with bezel compensation and EDID parsing, ensures flawless display arrangement and resolution support, making it ideal for both large-scale and small-scale video wall applications.
BTREE's Camera ISP for HDR is designed to enhance image processing by delivering superior high dynamic range capabilities. This product plays a crucial role in capturing more detailed and nuanced visual information, even in challenging lighting conditions, making it an ideal solution for applications requiring exceptional image clarity. It integrates seamlessly with modern camera systems, ensuring a significant improvement in image quality. The Camera ISP for HDR leverages advanced algorithms to process images efficiently, reducing noise while preserving detail and color accuracy. This allows for a more realistic representation of real-world scenes, enhancing the overall user experience. As such, this product is particularly valuable for applications in photography, surveillance, and any other industry where high-quality imagery is paramount. Furthermore, the ISP's flexible architecture allows for easy integration and adaptation to various hardware setups. It is designed to optimize performance while minimizing power consumption, making it suitable for a wide range of devices from high-end cameras to compact consumer electronics. The Camera ISP for HDR is a testament to BTREE's commitment to pushing the boundaries of imaging technology.
The SMS Fully Integrated Gigabit Ethernet & Fibre Channel Transceiver Core is an advanced solution designed for high-speed data transmission applications. This core incorporates all necessary high-speed serial link blocks, such as high-speed drivers and PLL architectures, which enable precise clock recovery and signal synchronization.\n\nThe transceiver core is compliant with IEEE 802.3z for Gigabit Ethernet and is also compatible with Fibre Channel standards, ensuring robust performance across a variety of network settings. It features an inherently full-duplex operation, providing simultaneous bidirectional data paths through its 10-bit controller interface. This enhances communication efficiency and overall data throughput.\n\nParticularly suited for networks requiring low jitter and high-speed operation, this transceiver includes proprietary technology for superior jitter performance and noise immunity. Its implementation in low-cost, low-power CMOS further provides a cost-effective and energy-efficient solution for high-speed networking requirements.
The SiC Schottky Diode from Nexperia is a powerful semiconductor component offering remarkable efficiency and fast switching capabilities. Engineered using Silicon Carbide technology, this diode is ideal for applications that require superior performance in high-frequency operations. Its inherent advantages include low forward voltage drop and minimal reverse recovery losses, which are essential for energy-efficient power electronics. This diode excels in high-pressure environments, supporting applications with stringent power management requirements. The SiC Schottky Diode's ability to operate at higher temperatures compared to silicon diodes makes it an excellent choice for automotive and industrial applications where thermal stability is crucial. This component addresses the growing demand for components capable of performing in advanced and robust electronic systems. Versatile in its application, the SiC Schottky Diode is particularly beneficial in systems where minimizing power loss is critical. It finds extensive use in power factor correction circuits, solar inverters, and industrial power supplies. Nexperia's dedication to high-quality and efficient designs is clearly exemplified in this product, which is crafted to enhance system performance and reliability.
The v-MP6000UDX Visual Processing Unit is a powerhouse of the Videantis portfolio, offering extensive capabilities for handling deep learning, computer vision, and video coding across a singular architecture. This unit brings prowess in processing tasks that require real-time performance and energy efficiency, making it pivotal for next-generation intelligent devices. Designed to support multiple computational requirements, the v-MP6000UDX processes deep learning models efficiently, acting as a unified platform that negates the need for disparate hardware accelerators. This processor's architecture is optimized for running complete neural networks swiftly and at low power, facilitating applications that demand rapid computing power with minimal energy constraints. Boasting a sophisticated memory hierarchy and high-bandwidth interfaces, the processor ensures efficient data handling and processing. Its enhanced memory architecture paired with a network-on-chip design fosters an environment where high-performance computations are achieved seamlessly. This makes the v-MP6000UDX suitable for deployment in complex systems such as autonomous vehicles, mobile technology, and industrial automation, where proficient data processing and precision are critical. Incorporating the latest design principles, the v-MP6000UDX unit integrates seamlessly into devices that require extensive video processing capabilities, benefiting from a vast library of codecs and support for emerging standards in video compression. This processing unit is indispensable for businesses aiming to enhance their product offerings with cutting-edge technology.
The 3DNR Image Processing solution is engineered to reduce noise in images, thus delivering a cleaner, clearer output. This technology is pivotal for enhancing image quality across various lighting conditions, ensuring that even low-light environments produce detailed visuals. BTREE's 3DNR technology stands out due to its advanced processing capabilities, which effectively minimize visual noise without compromising key details within the image. Designed with modern imaging needs in mind, the 3DNR Image Processing solution helps to maintain the integrity and vibrancy of colors, contributing to a more natural appearance of the image. This makes it well-suited for applications such as security systems, automotive imaging, and consumer electronics, where clarity and detail are essential. Additionally, BTREE has optimized their 3DNR solution to integrate seamlessly with existing imaging architectures, enhancing its versatility. The technology's efficiency in processing ensures minimal latency, providing real-time noise reduction capabilities that make it an ideal choice for a wide range of applications that depend on swift and accurate image processing.
APIX3 stands as the third generation of Inova’s APIX technology, engineered to elevate the capacity and functionality of automotive infotainment systems. APIX3 enables the transmission of UHD video over singular or multiple channels, reaching speeds of up to 12 Gbps with quad twisted pair cables. This latest version maintains backwards compatibility with APIX2 and includes advanced diagnostic tools to monitor cable integrity. Its advanced features offer enhanced Ethernet and serial protocol support, meeting a broad spectrum of automotive communication needs.
The logiVIEW IP core is a sophisticated video and image processing solution that corrects fish-eye lens distortions and performs arbitrary homographic transformations. It also enables video texturing on curved surfaces and allows for image stitching from multiple video inputs. This versatile IP is crucial for enhancing video imagery quality in applications where multiple viewpoints or perspectives are required, such as in advanced automotive systems and 3D imaging setups.
The Column A/D Converter for Image Sensors is a specialized IP designed to facilitate high-performance analog-to-digital conversion within CMOS image sensors. Utilizing techniques like Single-Slope and "Warp & Walk" algorithms, this converter achieves precise digitization of analog input, ensuring high-resolution and high-speed performance. It is particularly useful in applications demanding rapid imaging such as digital cameras and surveillance systems. This IP supports up to 12-bit conversion accuracy, allowing it to handle high-frequency analog signals with exceptional fidelity. Its design incorporates innovative approaches to error minimization and noise reduction, such as the Fine Calibration Technique, which helps maintain integrity in signal processing. The converter's sophisticated architecture enables it to perform at low power, making it highly suitable for battery-powered imaging devices. Engineered with scalability in mind, the Column A/D Converter IP can be easily integrated into manufacturing processes, supporting various process nodes for maximum flexibility. The ability to maintain high-speed operation without compromising performance is essential in modern imaging applications, where fast and accurate data conversion is a prerequisite. By enhancing the imaging chain in electronics, the Column A/D Converter IP contributes significantly to improving image sensor capabilities, offering superior image quality and efficiency. Its adaptability ensures it meets the needs of complex imaging systems, providing a crucial component in the advancement of high-definition and high-speed imaging technologies.
The DVB-C QAM demodulator is designed to be used with a cable tuner and an ADC. It features an internal state machine for operation control, configurable via the SPI interface. The IP supports QAM constellations from 16 to 256, using blind acquisition and decision-feedback mode for tracking. It also includes convolutional interleaving and Reed-Solomon error correction to address signal degradation due to impulse noise. The device offers both parallel and serial MPEG outputs and complies with DVB-C EN 300 429 and ITU-T J.83 Annex A & C standards.
The Display Compression Encoder and Decoder offered by BTREE is a comprehensive solution aimed at enhancing display data management through efficient compression and decompression processes. This product is engineered to significantly reduce the amount of data required for image transmission, which is crucial for improving bandwidth utilization and minimizing latency in visual computing applications. With an eye towards maintaining high fidelity, these encoder and decoder technologies preserve the quality of the original image during the compression and decompression cycles. This ensures that users experience seamless visual output without perceptible loss of quality. As a result, this solution is particularly beneficial for applications in gaming, video conferencing, and large-scale digital displays, where rapid and efficient data handling is critical. The Display Compression technology is based on advanced algorithms that are capable of handling high-resolution and high-frame-rate content, ensuring that it meets the demands of modern consumer and professional electronic devices. The capability to reduce power consumption while maintaining performance makes it ideal for a wide array of devices, from portable electronics to high-end visual systems.
The INAP590T combines advanced transmission capabilities with cutting-edge security features like HDCP support. It facilitates the secure transmission of video and audio data, supporting high-definition multimedia interfaces. Aimed primarily at automotive infotainment systems, this transmitter offers scalable bandwidth options, ensuring that even with the transmission of multiple video streams, data integrity and speed are not compromised. Its ability to adapt to various transmission setups makes it a core component in the latest infotainment architectures.
The Orion family of pattern projectors from Metalenz represents a leap forward in optical projection technology by utilizing meta-optics to achieve compactness and precision. These projectors are designed to meet the needs of various applications, particularly those requiring high-quality pattern projection, such as AR/VR systems and industrial automation tools. Orion projectors distinguish themselves by using metasurface optics, which provide a smaller form factor and require less power than conventional optical systems. This capability makes them ideal for integration into portable or compact consumer devices, delivering excellent projection performance without the bulkiness of traditional systems. By implementing metasurface technology, the Orion projectors can emit complex light patterns with improved energy efficiency, ensuring that the systems using them can operate longer on battery power and deliver more vivid and precise projections. This innovation is critical in enhancing the realism and functionality of next-generation display and sensing technologies.
LucidEye Visibility Improver Hardware focuses on enhancing the clarity and quality of video images, particularly in challenging conditions with low visibility. Utilizing AI-driven technology, this solution significantly improves video quality by refining details that might otherwise be obscured. This hardware is a powerful tool for broadcasters and content creators who require precise visual quality and clarity in their transmissions. It is engineered to deliver superior image processing, ensuring that video content is not only clear but also maintains fidelity even under adverse conditions. Advanced AI algorithms aid in dynamically adjusting video output, making LucidEye indispensable for operations where environmental factors impact visibility. Its integration is crucial for sectors like security and live broadcasting, providing a reliable means to ensure clear and detailed visual output.
EM Twin is an advanced simulation tool specifically designed for digital antenna twin modeling. This software provides high precision and efficiency in antenna designs, making it essential for industries like automotive and exposure simulations. Using state-of-the-art technologies combined with existing solver expertise, EM Twin offers substantial simulation speed and quality improvements, facilitating accurate and quick evaluations of complex scenarios. Users benefit from cost reductions and streamlined workflow, with the tool available as both a standalone application and an add-on for existing systems.
The ADQ35-WB RF Digitizer from Teledyne SP Devices offers dual-channel capability with a focus on supporting high-frequency applications. This device can handle up to 10 GSPS sampling rates, which means it's adept at managing substantial data throughput without sacrificing precision. The digitizer is designed to operate within a 9 GHz usable input bandwidth, making it an ideal solution for RF applications where wide bandwidth is crucial. Featuring robust construction, this RF digitizer integrates seamlessly into various mission-critical environments due to its stability and signal acquisition quality. The ADQ35-WB supports configurations that enhance its adaptability for use in engineering, testing, and developmental settings where rapid response and precision are required. With effective analog bandwidth and high-speed processing abilities, it streamlines the analysis of fast-changing signals. Additionally, the digitizer incorporates advanced features like automated baseline stabilization and pulse dynamic range extension, improving accuracy in signal measurements. These enhancements are particularly relevant for applications such as telecommunication, radar, and other sectors that demand reliable signal precision and clarity.
The GL3004 serves as a crucial interface controller designed to operate effectively across diverse platforms. It supports multiple USB standards, offering versatility for devices that require efficient and fast data connection capabilities. This controller enhances the performance in computing and peripheral connectivity, ensuring seamless data transmission and interaction. Built for environments that demand high-speed data exchanges, the GL3004 is ideal for use in computing, industrial applications, and consumer electronics. Its durable design assures consistent performance even under intensive data workload conditions, making it suitable for mission-critical applications. By incorporating advanced USB interfacing techniques, the GL3004 optimizes data flow and communication between connected devices, reducing latency and enhancing operational efficiency. This IP has become integral in systems where maintaining high-speed connectivity and low power usage is a primary objective. Developers benefit from the GL3004's ability to simplify system architecture with its flexible and integrated design approach, reducing time-to-market for new products. Its reliability and performance make it a favored choice for professionals seeking robust connectivity solutions in their technology.
The logiISP-UHD provides an advanced ultra-high-definition video pipeline, supporting resolutions such as 4K2Kp60, tailored for enhancing image quality in digital processing. Optimized for AMD Zynq UltraScale+ MPSoC, Zynq 7000 AP SoC, and newer FPGA devices, this IP core is particularly designed for embedded applications requiring superior video input processing and quality enhancement.
Crafted for integration into robotic welding environments, the RF627Smart-Weld system from Riftek automates the tracking of weld seams. This advanced system provides incredible precision in controlling the movement of welding torches, while simultaneously performing in-depth inspections of weld bead profiles. Its built-in interfaces link efficiently with popular robotic models, allowing for seamless synchronization with existing systems. Suited for various welding scenarios, this system enhances productivity and ensures the integrity of welded joints.
The Direct Digital Synthesizer (DDS) by Zipcores is engineered for precise waveform generation, digital mixing, and up/down conversion tasks. It provides simultaneous outputs including SIN, COS, square, and sawtooth waveforms, offering a significant signal-to-noise ratio (SNR) around 100 dB and a spurious-free dynamic range (SFDR) better than 110 dB with phase dithering enabled. This DDS is particularly useful for applications requiring high-precision periodic waveform synthesis and is a versatile component in signal processing and communications systems. Its robust design ensures optimal performance in generating complex waveforms, making it integral to advanced digital signal processing projects.
The v-MP4000UDX Visual Processing Unit by Videantis is a formidable processing solution designed to meet the demands of modern deep learning and computer vision applications. This unit integrates key functionalities of image and signal processing with enhanced capabilities for video coding. Its architecture is designed to handle various data-intensive tasks on a single platform, reducing the complexity involved in developing and integrating such functionalities into embedded systems. Equipped with a unified architecture, the v-MP4000UDX ensures all embedded processing activities take place without requiring additional hardware or extensive power resources. This integration allows for streamlined workflows that keep power usage and costs to a minimum. It supports tasks like neural network computation, making it ideal for devices that require advanced visual processing such as automotive systems, mobile devices, and professional-grade equipment. The v-MP4000UDX Visual Processing Unit excels at processing high volumes of data efficiently. It is recognized for its ability to support a range of image processing functions, while also ensuring advanced video codec standards are maintained. This makes it an excellent choice for high-performance applications that demand low latency and high-quality output. The flexibility and power efficiency of this processing unit affirm its suitability for a wide array of professionals seeking reliable and cutting-edge technology solutions.
The logiHDR pipeline is designed to optimize camera image quality by extracting the fullest detail from high-contrast scenes. Capable of processing ultra-high-definition (UHD) content, including 4K2Kp60, it enhances elements in scenes affected by bright sunlight or deep shadows, making it ideal for use in environments that require excellent image clarity and contrast.
M31's DisplayPort TX is a transmitter IP focused on providing high-bandwidth data transfer capabilities for digital video and audio interfaces. This technology ensures efficient transmission of multimedia content across devices, meeting the specifications for crisp, high-definition signal output. It is especially beneficial for applications that demand superior video quality, such as broadcasting, gaming, and professional graphics.
This sophisticated laser seam tracking system designed by Riftek is tailored for the automation of welding operations. It accurately navigates welding torches, ensuring the precise placement and adherence of weld seams. The system's ability to evaluate weld bead geometries in real-time makes it an invaluable tool for enhancing welding quality and efficiency, driving forward manufacturing capabilities through automation and intelligent control systems.
This comprehensive IP design framework is optimized for use with Xylon's logiVID-ZU vision kit, leveraging the AMD Zynq UltraScale+ MPSoC. By delivering pre-verified camera-to-display reference designs, it significantly expedites design processes, allowing developers to focus on application-specific enhancements in fields such as AD/ADAS, machine vision, and robotics.
The DisplayPort RX from M31 is tailored for receiving high-definition video and audio signals, supporting the growing demand for multimedia consumption. This IP's capability to handle multi-lane data ensures seamless reception and processing of high-quality streaming content. It is particularly suitable for devices requiring superior image and sound fidelity, such as home entertainment systems and professional media equipment.
The GW5AT Video Bridging IP is a remarkable showcase of GOWIN Semiconductor's FPGA capabilities, incorporating high-speed SerDes blocks to facilitate video bridging at impressive data rates. Anchored by the GW5AT-60K FPGA, this demonstration highlights the potential for robust and high-speed video streaming, supporting formats up to 4K. The integration of high-speed SerDes blocks ensures efficient data transfer, crucial for applications requiring real-time video processing and transmission. This IP is a testament to how GOWIN's technology can meet the diverse needs of industrial and consumer electronics by providing exceptional performance and enhancing design flexibility. The Video Bridging Demo not only exemplifies GOWIN's cutting-edge FPGA advancements but also reinforces its viability in demanding video applications where reliable and high-throughput processing is paramount.
Join the world's most advanced semiconductor IP marketplace!
It's free, and you'll get all the tools you need to discover IP, meet vendors and manage your IP workflow!
No credit card or payment details required.
Join the world's most advanced AI-powered semiconductor IP marketplace!
It's free, and you'll get all the tools you need to advertise and discover semiconductor IP, keep up-to-date with the latest semiconductor news and more!
Plus we'll send you our free weekly report on the semiconductor industry and the latest IP launches!